Skip navigation

Automotive

ProfilControl_7_DualVision_ausschnitt.jpg

ProfilControl DualVision

  • Surface
  • Dimension
  • Profile
  • Tube/cable

A milestone in automated quality control of profiles, tubes, pipes and cables!

This compact system not only combines surface inspection and dimension measurement. It can also perform several different, highly challenging measuring and inspection tasks at the same time. Measuring performance at its best – combined with highest user friendliness.

Industry-specific products

  • Sealing profiles for car bodies, hoods, doors
  • Hoses for brakes, A/C, cooling systems
  • Profiles for windshield wipers
  • Trims and cover fillets
  • Metal profiles for car bodies and drive trains
  • Window shaft seals
  • Edge protection profiles
  • and many more

Your benefits at a glance

  • Reduces production costs
  • Increases product quality and output
  • Automated and more efficient processes
  • Increases process stability and repeatability
  • Interlinking of Big Data - Ready for Industry 4.0
  • Saves resources and investment capital
  • Scalable technology – Made in Germany

Highlights of ProfilControl DualVision

  • Fehler_Gummiprofil_Blase.jpg
    Bubble on rubber profile
  • Fehler_Gummiprofil_Kratzer.jpg
    Scratches on rubber profile
  • Fehler_Eindruecke_Profilkante.jpg
    Irregular profile edge

Detectable defects and deviations

Specially developed lighting elements ensure that the measuring field is extremely homogeneously lit, allowing the camera sensors to even capture and process invisible and difficult-to-detect irregularities and defects – for example, specks, pores, scratches, blisters, fissures or grooves.

Optional system modules

Baustein_Defektdichte.jpg
Defect Density Management (DDM)

Not every defect automatically means that a product is “out of spec”. In many cases, a certain number of smaller defects on a defined length of the product is tolerable. The DDM (Defect Density Management) module allows you to define - by simple sets of rules - defect densities and defect sizes that shall be considered as still acceptable.

Baustein_Profilloecher.jpg
Borehole ckeck

This additional module allows ProfilControl 7 to differentiate between defects and boreholes. It is possible to measure the shape and diameter of a borehole as well as the distances between boreholes and assess these measurements against preset out-of-spec tolerances.

Baustein_Flock_Fehlstellen.jpg
Flock module

In addition to the standard topographic defect detection, this module also checks for flaws in the flock such as spots of missing flock, accumulations or longitudinal grooves. It is also possible to inspect flock edges for missing flock or check for wavy flock.

Technical data ProfilControl 7 DualVision

Measured objectProfiles/hoses/tubing/tubes/cables made of rubber, plastics or metal
Measuring fieldAvailable with FOV of 90, 170 or 250 mm diameter
Resolution≥ 10 μm
Measuring accuracy< 10 μm
Repeatability0.01% of the FOV
Camera module8 CMOS cameras
Lighting unitPower-LEDs and high performing line laser
Unit size (mm)2250 (H)  x 590 (B) x 1150 (T)
Other specificationsSee data sheet (pdf)
  

Standard version! - Other features on request.

You could not find, what you were looking for?

As a leading supplier of inspection systems with 20 years of know-how we search for your individual solution – even in case of special applications.

Please contact us: +49 2405 47908-26
Or send us an e-mail: salespixargusde

Here you find an overview of all our products: