Skip navigation



ProfilControl 7 DualVision Tube

  • Surface inspection
  • Dimension measuring
  • Tube/cable

The most delicate requires top material quality!

The extraordinary measuring technology allows the system to simultaneously check the material and measure the dimensions – of the entire product, in real time and during production. It not only detects inhomogeneities such as inclusions and contaminations in transparent tubings or hoses. The system can also be used, for example, to reliably and precisely inspect spirals in shape-retaining ducts. For your and everybody’s safety!

Industry-specific products

  • Ultra-thin capillary tubing
  • Shape-retaining tracheal and endotracheal tubes
  • Clean room approved cables
  • Micro tubing and cannulas
  • and many more

Your benefits at a glance

  • Provides maximum safety in terms of product quality under clean room conditions
  • Increased output and reduces process costs
  • Automated and more efficient processes
  • Increases process stability and repeatability
  • Interlinking of Big Data - Ready for Industry 4.0
  • Saves resources and investment capital
  • Scalable technology - Made in Germany

Highlights of ProfilControl 7 DualVision Tube

  • Fehler_Riss_med-Schlauch.jpg
    Fissures in tubing
  • Fehler_Blase_Tube.jpg
  • Fehler_Fleck_Rohr.jpg
    Contaminations in the tube material

Detectable defects and deviations

Specially developed lighting elements ensure that the measuring field is extremely homogeneously lit, allowing the camera sensors to even capture and process invisible and difficult-to-detect irregularities and defects - for example, pores, fissures, foreign particles, inclusions or inhomogeneities.

Optional system modules

Defect Density Management (DDM)

Not every defect automatically means that a product is “out of spec”. In many cases, a certain number of smaller defects on a defined length of the product is tolerable. The DDM (Defect Density Management) module allows you to define - by simple sets of rules - defect densities and defect sizes that shall be considered as still acceptable.

Pattern recognition

With the new integrated pattern-detection feature, ProfilControl 7 systems now also identify structures inside the tubing material, such as spirals embedded in, for example, semi-transparent, shape-retaining tubes for endotracheal suctioning. The module checks the shape of the spirals and triggers an alarm as soon as any deviations are identified.

Lumen detection

Often, medical tubing has to be produced with different lumens. A special lumen detection feature assures the quality and detects any deviations from the specifications of transparent or opaque tubing products. Here, ProfilControl 7 S Medictube provides maximum safety.

Technical data ProfilControl 7 DualVision MedicTube

Measured objectMedical profiles/tubing/tubes/cables made of rubber, plastics or metal
Measuring field90 mm diameter FOV
Resolution≥ 10 μm
Measuring accuracy< 10 μm
Repeatability0.01% of the FOV
Sensor unit8 CMOS cameras
Lighting unitPower-LEDs and high performing line laser
Unit size (mm)2250 (H)  x 590 (B) x 1150 (T)
Other specificationsSee data sheet (pdf)

Standard version! - Other features on request.

You could not find, what you were looking for?

As a leading supplier of inspection systems with 20 years of know-how we search for your individual solution – even in case of special applications.

Please contact us: +49 2405 47908-26
Or send us an e-mail:

Here you find an overview of all our products: