Skip navigation

Medical

IMG_1159_bearb_produktkachel_stoerer-EN.jpg

iProfilControl

  • Surface
  • Dimension
  • Profile

The new key technology for surface inspection of simple to highly complex profiles – innovative and revolutionary!

This modularly scalable system, featuring specialist sensor technology, compact design and intelligent process control, reduces reject rates, minimizes process costs and makes your quality reproducible and safe. This ensures that only perfectly flawless material is shipped to your customers.

Industry-specific products

  • Ultra-thin capillary tubing
  • Shape-retaining tracheal and endotracheal tubes
  • Clean room approved cables
  • Micro tubing and cannulas
  • and many more

Your benefits at a glance

  • Based on our proven PC7 inspection technology
  • Scalable up to 8 sensors
  • Also as all-in-one - with real cost advantage
  • Compact desk-top system – Ready to run!
  • Hinged cover of the sensor head. No unwanted exterior light effects!
  • Remote control via tablet, notebook or networked PC
  • Interlinking of Big Data - Ready for Industry 4.0

Highlights of iProfilControl

  • Fehler_Gummiprofil_Kratzer.jpg
    Scratches on rubber profile
  • Fehler_Eindruecke_Profilkante.jpg
    Irregular profile edge
  • Fehler_Fleck_Rohr.jpg
    Inclusions in the tube material
  • Fehler_DXProfileView.jpg
    Deviation from the nominal profile

Detectable defects and deviations

Specially developed lighting elements ensure that the measuring field is extremely homogeneously lit, allowing the camera sensors to even capture and process invisible and difficult-to-detect irregularities and defects – for example, specks, pores, scratches, blisters, fissures or grooves.

Optional system modules

Baustein_Defektdichte.jpg
Defect Density Management (DDM)

Not every defect automatically means that a product is “out of spec”. In many cases, a certain number of smaller defects on a defined length of the product is tolerable. The DDM (Defect Density Management) module allows you to define - by simple sets of rules - defect densities and defect sizes that shall be considered as still acceptable.

Baustein_Profilloecher.jpg
Borehole ckeck

This additional module allows ProfilControl 7 to differentiate between defects and boreholes. It is possible to measure the shape and diameter of a borehole as well as the distances between boreholes and assess these measurements against preset out-of-spec tolerances.

Baustein_Flock_Fehlstellen.jpg
Flock module

In addition to the standard topographic defect detection, this module also checks for flaws in the flock such as spots of missing flock, accumulations or longitudinal grooves. It is also possible to inspect flock edges for missing flock or check for wavy flock.

System features iProfilControl

Inspected itemsSimple to highly complex profiles made of rubber, plastics or metal
Measuring fieldAvailable with FOV of 90, 170 or 250 mm diameter
Resolution≥ 50 μm
Measuring accuracy< 10 μ
SensorsPIXARGUS multi-camera sensor, scalable to 4, 6 or 8 cameras
Illumination unitiPC Dimension: line laser / iPC Surface: LEDs / iPC DualVision: line laser and LEDs
Dimensions (mm)90: 705 (H) x 740 (W) x 540 (D) mm
170: 725 (H) x 860 (W) x 560 (D) mm
250: on request
Other specificationsSee data sheet (pdf)

Standard version! Other features on request.

You could not find, what you were looking for?

As a leading supplier of inspection systems with 20 years of know-how we search for your individual solution – even in case of special applications.

Please contact us: +49 2405 47908-26
Or send us an e-mail: salespixargusde

Here you find an overview of all our products: