PC7 Inspection Automat
- Surface inspection
- Dimension measuring
- Single piece
Optical single-piece inspection of cut-to-length or die-cut micro tubing or other small parts made of plastics, rubber or metal.
Surface and edge inspection in the inclined freefall mode at a rate of up to 1,000 pieces per min. Any faulty parts with grooves, scratches, dents etc. or with inaccurately cut edges will be sorted out immediately, ensuring that only product 100-percent checked and perfectly flawless is shipped to the customer.
- Medical micro tubing (cannulas or stents) made of plastics or metal (e.g. stainless steel, aluminum)
- Medical tubes
- Micro tubing made of stainless steel, aluminum or plastics
- and many more
Your benefits at a glance
- Provides maximum safety in terms of product quality under clean room conditions
- Increased output and reduces process costs
- Automated and more efficient processes
- Increases process stability and repeatability
- Interlinking of Big Data -Ready for Industry 4.0
- Saves resources and investment capital
- Scalable technology - Made in Germany
Highlights of PC7 Inspection Automat
PIXARGUS Multi-Camera Sensor Technology
Pixargus high-capacity multi-camera sensors guarantee 100-percent quality control of e.g. simple products such as micro tubes as well as highly demanding precision tubings of up to 10 mm in diameter, which have to comply with extremely exacting surface and edge quality specifications. Scalable system generation with modularly adjustable multi-zone scanning and LED-based lighting elements developed by PIXARGUS.
Innovative inspection in Free Fall mode
ProfilControl 7 FFI guarantees 100 percent/360° inspection! Single pieces, e.g. micro tubings, are detected while in free fall. The test pieces, fed one after the other into the sensor head, drop past the LED lighting elements and the high-resolution cameras. They are scanned as they are falling, i.e. in real time. The detection process takes place so fast that any faulty pieces are sorted out by a special device just a few centimeters below the measuring head. The optional edge detection feature, which checks both edges of the cut pieces, completes the concept of total quality control, as it guarantees 100 percent inspection of each individual piece.
Intelligent operator guidance via a 21.5” multitouch screen and a clearly structured cockpit displaying all camera images and parameter settings make for easy and swift operation. Comfortable assistance systems, such as the automatic and simplified lighting control and focusing feature, reduce the set-up effort and eliminate operating errors.
“Big Data” becomes “Quality@ Industry 4.0”
ProfilControl 7 is Industry 4.0 ready, as it can be intelligently networked via LAN or other interfaces with additional sensors, measuring systems, PDA and ERP systems, and a PLC environment. It interlinks the quality data measured by the sensors and combines them into an integrated data map. Thus, the user can analyze the results within a coherent context and condense “big data” to what is really needed.
Compact. Robust. Made in Germany.
The housing and wiring of the system have been designed specifically for service under most severe conditions. Thus they easily cope even with high mechanical stress. Tried and tested materials, ergonomic design and precision engineering guarantee longevity and provide security of investment.
The system detects and classifies surface defects, such as inclusions, grooves, scratches or dents, over the complete product length. It also checks the cut edges for burs or other irregularities. With six high-speed cameras of more than 2,500 pixels each, the system detects surface defects down to 30 µm.
Optional system modules
Defect Density Management (DDM)
Not every defect automatically means that a product is “out of spec”. In many cases, a certain number of smaller defects on a defined length of the product is tolerable. The DDM (Defect Density Management) module allows you to define - by simple sets of rules - defect densities and defect sizes that shall be considered as still acceptable.
The optional Groove Module ensures that also longitudinal grooves resulting from an incident in the production process are reliably detected. In the worst case, such grooves may run along the complete length of the product. With the Groove Module the causes of the problem can be swiftly identified and remedied so as to bring the reject rate down again.
The optional Edge Detection Module ensures reliable inspection of edges and corners. It detects any deformations or undesired burs. As faulty product will be sorted out immediately, adaptation problems are a thing of the past.
|Measured object||Cut-to-length micro profiles/tubing/tubes/cables made of rubber, plastics or metal up to 10 cm long (as standard)|
|Measuring field||≤ 50 mm diameter|
|Resolution||≥ 50 μm|
|Capacity/throughput rate||≤ 1.000 pieces/min, inspection in inclined freefall mode|
|Camera module||8 CMOS cameras|
|Lighting||Integrated high-capacity LED light ring|
|Unit size (mm)||2200 width x 2100 height x 1000 depth (approx. 450kg)|
|Other specifications||See data sheet (pdf)|
You could not find, what you were looking for?
As a leading supplier of inspection systems with 20 years of know-how we search for your individual solution – even in case of special applications.
Please contact us: +49 2405 47908-26
Or send us an e-mail: sales@~@pixargus.de
Here you find an overview of all our products: